Name: Wireless Access Point DELL Aerohive AP230
Brand: DELL EMC
Rating: 0 (0 reviews)

Wireless Access Point DELL Aerohive AP230

Specifications

802.11ac Wave 1
Performance-optimized dual-radio 3x3:3 Access Point
IoT readiness with USB port
Full performance with IEEE 802.3af power
Trusted Platform Module (TPM) – Hardware-based key storage and encryption Dual GbE ports with link aggregation

Liên hệ mua hàng

Tư vấn, hỏi giá, Mua hàng: Vui lòng gọi

HOTLINE: 0913324060

Đặt hàng: info@emerald.com.vn

Hàng chính hãng

Giao hàng ngay (Nội thành TP.HCM)

Nhân viên Kinh Doanh

Ms Sang: 0913 324 060
Mr Huy: 0929 668 446
Anh Kha: 0358.223.136

Tư vấn kỹ thuật:

Mr Huy - 0929 668 446

Thông số kỹ thuật
Tài liệu liên quan

Aerohive AP230 Specifications
Radio Specifications—802.11a	5.150–5.950 GHz Operating Frequency Orthogonal Frequency Division Multiplexing (OFDM) Modulation Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11b	2.4–2.5GHz Operating Frequency Direct-Sequence Spread-Spectrum (DSSS) Modulation Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
Radio Specifications—802.11g	2.4–2.5 GHz Operating Frequency Orthogonal Frequency Division Multiplexing (OFDM) Modulation 20 dBm (100 mW) Transmit Power Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11n	2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency 802.11n Modulation Rates (Mbps): MCS0–MCS23 (6.5Mbps - 450Mbps) 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz) A-MPDU and A-MSDU Frame Aggregation
Radio Specifications—802.11ac	5.150–5.950 GHz Operating Frequency 802.11ac Modulation (256-QAM) Rates (Mbps): MCS0–MCS9 (6.5Mbps - 1300Mbps), NSS = 1-3 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio VHT20/VHT40/VHT80 support
Mounting	Desktop Wall Mount included as part of AP Built-in slot for Kensington type locks Ceiling and Wall Mount locking accessory included with AP Ceiling Tile flush 15/16” included as part of AP Ceiling Tile Recessed 15/16”, 3/8”, 9/16” sold as an accessory Ceiling Tile flush 3/8”, 9/16” sold as an accessory Suspend Mount sold as an accessory Plenum Mount sold as an accessory
Antennas	3x Integrated single band, 2.4-2.5 GHz Omni-directional antennas, 6.0 dBi peak gain 3x Integrated single band, 5.1-5.8 GHz Omni-directional antennas, 6.0 dBi peak gain
Interfaces	2x autosensing 10/100/1000 Base-T Ethernet Ports Dual Ethernet ports with backhaul capabilities Link Aggregation supported via Ether channel (link aggregation) 1x Serial RJ45 port (bits per second: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none) USB 2.0 port (Future use) 1x Reset Pinhole
Physical	WxHxD: 7.25” x 7.25” by 1 7/8” tall (plus .25” for the mounting hardware) – so 2.12” (5.4 cm) high total Weight: 1.6 lbs (.73 kilograms)
Environmental	Operating: 0 to 40°C, Storage: -40 to +70°C, Humidity: 95%
Environmental Compliance	UL 2043
Power Options (sold separately)	802.3af (minimum required) and/or 802.3at Power over Ethernet PoE Injector 12v DC external power adapter Aerohive switch products
Power Specification	AC/DC power adapter: – Input: 100–240 VAC – Output: 12v/2.0A PoE nominal input voltages: 48V, 0.35A, (802.3af) – 48V, 0.625A (802.3at) RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6 802.3af compatible with Cat-5 cable or higher (up to 14.5W draw with full functionality)