Switch Aruba 2530 24G PoE+ (J9773A)

Aruba 2530 24G PoE+ Switch (J9773A, J9773ACM1)

I/O ports and slots

24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX;

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports

Additional ports and

slots

1 dual-personality (RJ-45 or USB micro-B) serial console port

Physical

characteristics

Dimensions

17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 33.02 x 4.45 cm) (1U height)

Weight

8.7 lb (3.95 kg)

Memory and processor

Processor

ARM9E @ 800 MHz, 128 MB flash; Packet buffer size: 1.5 MB dynamically allocated, 256 MB DDR3 DIMM

Mounting and

enclosure

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting

Performance

IPv6 Ready Certified

100 Mb Latency

< 7.4 µs (LIFO 64-byte packets)

1000 Mb Latency

< 2.3 µs (LIFO 64-byte packets)

Throughput

up to 41.6 Mpps (64-byte packets)

Switching capacity

56 Gbps

MAC address table size

16000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

15% to 95% @ 104°F (40°C), noncondensing

Non-operating/ Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-

operating/Storage relative humidity

15% to 90% @ 149°F (65°C), noncondensing

up to 10,000 ft (3 km)

Acoustic

Power: 43.9 dB, Pressure: 39.6 dB

50/60 Hz

Maximum heat dissipation

135 BTU/hr (142.42 kJ/hr), (switch only: 135 BTU/hr; combined switch + max. PoE devices: 843 BTU/hr)

Voltage

100 - 127 / 200 - 240 VAC, rated

Current

3.2/1.6 A

Maximum power rating

247 W

Idle power

25.2 W

PoE power

195 W

Notes:

• Idle power is the actual power consumption of the device with no ports connected.
• Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
• PoE power is the total power budget available to all PoE ports.

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1

Emissions

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

Generic

EN 55024, CISPR 24

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2

Radiated

IEC 61000-4-3

EFT/Burst

IEC 61000-4-4

Surge

IEC 61000-4-5

Conducted

IEC 61000-4-6

Power frequency

magnetic field

IEC 61000-4-8

Voltage dips and interruptions

IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB);

IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB

Notes:

• IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
• 1 All hardware SKUs can be managed by Aruba Central. Central Managed (CM) SKUs are used for simplified ordering within U.S. and Canada only. Append "CM" to the indicated SKU #: (e.g., J9772ACM to order the J9772A). Requires an active Central license and end-user information consistent with the Central license purchase. Applicable accessories with a valid "CM" suffix should also be placed on the same order.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.