Aruba AP-555 (RW)

Aruba AP-555 (RW)

Aruba AP-555 (RW) Dual Radio 8x8:8 / 4x4:4 802.11ax Internal Antennas Unified Campus AP

Tư vấn, hỏi giá, Mua hàng: Vui lòng gọi

HOTLINE: 0913324060

Đặt hàng: info@emerald.com.vn

Hàng chính hãng

Giao hàng ngay (Nội thành TP.HCM)

Nhân viên Kinh Doanh

  • Ms Sang: 0913 324 060
  • Mr Huy: 0929 668 446
  • Anh Kha: 0358.223.136

Tư vấn kỹ thuật:

  • Mr Huy - 0929 668 446

Thông số kỹ thuật: Aruba AP-555 (JZ356A)

Wi-Fi Radio Specifications

  • AP type: Indoor, dual/tri-radio, 5GHz and 2.4GHz 802.11ax 4×4 MIMO
  • 5GHz radio (dual-radio operation): Eight spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate with individual 8SS HE80 (or 4SS HE160) 802.11ax client devices, or with eight 1SS or four 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 5GHz radio (tri-radio operation*): Four spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with individual 4SS HE80 (or 2SS HE160) 802.11ax client devices, or with four 1SS or two 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 2.4GHz radio: Four spatial stream Single User (SU) MIMO for up to 1,150Mbps wireless data rate with individual 4SS HE40 802.11ax client devices or with two 2SS HE40 802.11ax MU-MIMO capable client devices simultaneously
  • Support for up to 1,024 associated client devices per radio*(typical recommended limit for active clients is 200), and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835GHz (radio 1)
    • 5.150 to 5.250GHz (radio 0 and 0L)
    • 5.250 to 5.350GHz (radio 0 and 0L)
    • 5.470 to 5.725GHz (radio 0 and 0U)
    • 5.725 to 5.850GHz (radio 0 and 0U)
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 37 resource units (for an 80MHz channel)*
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
    • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
    • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 600 (MCS0 to MCS31, HT20 to HT40), 800 with 256-QAM
    • 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160), 2,166 with 1024-QAM
    • 802.11ax (2.4GHz): 3.6 to 1,147 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE40)
    • 802.11ax (5GHz): 3.6 to 4,804 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Wi-Fi Antennas

  • Integrated downtilt omni-directional antennas for 4×4 MIMO in 2.4GHz with peak antenna gain of 4.3dBi, and 8×8 MIMO in 5GHz with peak antenna gain of 5.8dBi in 5GHz. In tri-radio mode, the peak gain of the antennas for each of the 4×4 5GHz radios is 5.5dBi (radio 0L, lower half of 5GHz) and 5.6dBi (radio 0U, upper half of 5GHz). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
    • A mix of horizontally and vertically polarized antenna elements is used
    • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.4dBi in 2.4GHz and 0.7dBi in 5GHz (dual- radio mode).
    • In tri-radio mode, the peak gain of the combined, average pattern is 1.1dBi (radio 0L, lower half of 5GHz) and 3.6dBi (radio 0U, upper half of 5GHz)

Other Interfaces

  • E0, E1: HPE SmartRate port (RJ-45, maximum negotiated speed 5Gbps)
    • Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX
    • 2.5Gbps and 5Gbps speeds comply with NBase-T and 802.3bz specifications
    • POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3 or higher)
    • 802.3az Energy Efficient Ethernet (EEE)
  • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
  • USB 2.0 host interface (Type A connector)
    • Capable of sourcing up to 1A / 5W to an attached device

Power Sources and Power Consumption

  • The AP supports direct DC power and Power over Ethernet (POE; on port E0 and/or E1)
  • When POE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources
  • When both DC and POE power sources are available, DC power takes priority over POE

Mechanical Specifications

  • Dimensions/weight (AP-555; unit, excluding mount bracket):
    • 260mm (W) x 260mm (D) x 58mm (H) / 10.2″ (W) x 10.2″ (D) x 2.3″ (H)
    • 1,570g / 55.4oz
  • Dimensions/weight (AP-555; shipping):
    • 320mm (W) x 303mm (D) x 108mm (H) / 12.6″ (W) x 11.9″ (D) x 4.3″ (H)
    • 2,230g / 78.7oz

Warranty

  • Aruba’s hardware limited lifetime warranty
EmeraldETL